The pro version of IP Login also gives you the ability to use IP ranges.
You can set ranges using the * wildcard to match any IP that starts with the given characters.
Or you can use a "dash" (-) for from - to ranges. In this case, the matched IP range depends on how many IP parts you give for the ending IP.
Here are some examples to show you how these work:
IPv4 Ranges
| IP Range | IP addresses matching range |
|---|---|
110.120.130.* | 110.120.130.0 to 110.120.130.255 |
110.120.* | 110.120.0.0 to 110.120.255.255 |
110.120.130.50-110.120.130.100 | 110.120.130.50 to 110.120.130.100 |
110.120.130.50-100 | 110.120.130.50 to 110.120.130.100 |
110.120.50.0-100.255 | 110.120.50.0 to 110.120.100.255 |
IPv6 Ranges
| IP Range | IP addresses matching range |
|---|---|
1111:2222:3333:4444:5555:6666:7777:* | 1111:2222:3333:4444:5555:6666:7777:0000 to 1111:2222:3333:4444:5555:6666:7777:ffff |
1111:2222:3333:4444:5555:6666:7777:1000-1111:2222:3333:4444:5555:6666:7777:a0000 | 1111:2222:3333:4444:5555:6666:7777:1000 to 1111:2222:3333:4444:5555:6666:7777:a000 |
1111:2222:3333:4444:5555:6666:7777:8888-dddd.eeee.ffff | 1111:2222:3333:4444:5555:6666:7777:8888 to 1111:2222:3333:4444:5555:dddd.eeee.ffff |